Features:
• 24-bit / 48kHz digital technology for incredibly accurate sound
• Shure microphones trusted by musicians for over 80 years
• Scan and sync instantly and automatically sets up the system
• Up to 10 hours of continuous use from 2 AA batteries
• Up to 200 ft (~60m) range for total wireless freedom
• True digital diversity for a rock-solid wireless signal
• 900 MHz operation free from TV signal interference
• Adjustable gain matches variable input levels
• Up to 5 systems can be used at once
• Rugged construction for reliable performance show after show
• Durable hard shell padded case gets your gear from gig to gig
PGXD14/85 Digital Lavalier Wireless System Specifications:
• Operating Range:
60 m (200 ft.) under typical conditions. Note: actual range depends on RF signal absorption, reflection and interference.
• RF Carrier Range
X8: 902–928 MHz
X8A: 915–928 MHz
X8B: 902–907.5 MHz, 915–928 MHz
Note: varies by region
• Audio Frequency Response (± 2dB): 20-20,000 Hz
• System Gain:
PGXD1: 0 dB at minimum gain setting, 6.35 mm (1/4") connector
-12.5 dB at minimum gain setting, XLR output
• Total Harmonic Distortion: <0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
• Dynamic Range: >108 dB A-weighted
• Operating Temperature Range
-18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range.
PGXD14/85 Lavalier Wireless System Includes:
• (1) PGXD1 Bodypack Transmitter
• (1) PGXD4 Wireless Receiver
• (1) WL185 Lavalier Condenser Microphone
PGXD4 Wireless Receiver
The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.
Features:
• 24-bit / 48kHz digital technology for incredibly accurate sound
• Automatic frequency selection locates a clear channel instantly
• One-touch sync automatically syncs the transmitter and receiver
• True digital diversity for rock-solid wireless signal reliability
• Up to 5 compatible channels per frequency band
• 1/4" and XLR audio outputs
• Included padded carrying case for portability and protection
Specifications:
• Dimensions: 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
• Weight: 289 g (10.2 oz.)
• Housing: ABS
• Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone):
XLR connector (into 3000 Ω load): -2.5 dBV
1/4 inch connector (into 10000 Ω load): +10 dBV
• Impedance:
XLR: 50 Ω
1/4 inch: 50 Ω
• Sensitivity: -102 dBm @ 10-5 BER
• Image Rejection: > 70 dB, typical
• XLR Output:
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
• Audio LED:
Red: 2 dB below clip, Amber: 12 dB below clip,
Green: 50 dB below clip
• Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
• Pin Assignments:
XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4")
TRS: Tip=audio, Ring=no audio,Sleeve=ground
PGXD1 Bodypack Transmitter
Powerful yet compact, the PGXD1 transmits wireless audio from instrument or microphone sources with pure digital clarity and rock-solid reliability.
Features:
• Rugged, compact bodypack with belt clip
• 20 Hz – 20 kHz frequency range captures every nuance of tone
• Power, mute, and battery status LED
• 200 ft (60 m) operating range
• Up to 10 hours of continuous use from 2 AA batteries
• Recessed dial on side provides 26 dB of continuously adjustable gain
• Lockable interface prevents accidental setting change
Specifications:
• Audio Input Level
+10 dBV maximum, at minimum gain setting
-16 dBV maximum, at maximum gain setting
• Gain Adjustment Range: 26 dB
• Input Impedance: 1 M ohms
• RF Output Level: 10 mW maximum (dependent on applicable country regulations)
• Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
• Weight: 128 grams (4.5 oz.) without batteries
• Housing: Molded polycarbonate case
• Power Requirements: 2 AA batteries
• Battery Life: Up to 10 hours
WL185 Lavalier Cardioid Microphone
Model WL185 is a lavalier electret condenser mic designed for use with a wireless body-pack transmitter. This mic has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility.
WL185 (Cardioid) is Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise. Use of windscreen highly recommended. Pickup angle: 130 degrees.
Specifications:
• Type: Condenser (electret bias)
• Frequency Response: 50 to 17,000 Hz
• Output Impedance: 1800 ohms
• Sensitivity (1 Pa = 94 dB SPL): -45.5 dBV/Pa
• Maximum Sound Pressure Level: 130.5 dB SPL
• Output Noise (A-weighted): 28.0 dB SPL
• Dynamic Range: 102.5 dB
• Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
• Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter.
|
